OPERATING INSTRUCTIONS
You can operate the appliance by the manual touch controls located on the unit or by using the
remote control. The remote control offers additional functions that cannot be operated using the
control panel. Therefore, please ensure it is kept safe by attaching it to the magnet on the side of the
appliance when not in use.
Remote Control
• The power (ON/OFF) button switches the appliance on and off.
• When the fan is switched on the digital display will automatically illuminate. Press the light
button on the remote to turn off the digital display.
• The wind mode functions can only be controlled on the remote by pressing the mode
button. The fan has three wind modes: Normal, Nature and Sleep.
Normal is the default wind mode, whereby the airflow will remain consistent and the strength
will correspond with the desired selected wind speed level between 1 and 9.
Nature mode varies the fan speed to simulate a natural sea breeze.
Sleep mode is designed to create a comfortable and soothing sleeping environment. The fan
speed will decrease by one level every 30 minutes so that the fan becomes quieter. This
mode is best used in conjunction with the timer function to avoid sleep disturbances.
• Press the timer on button whilst the fan is in standby mode to set a time for the fan to switch
on within a 1-9-hour range. Note, you can only set the timer in one-hour intervals. When the
timer is set, the digital display will alternate between the current wind speed and the duration
until the fan switches on (providing the display light has not been switched off). If the time
frame that the timer has been set to switch on in is beyond one hour, the number displayed
next to the timer will reduce by an hour after each hour that passes, to provide a more
accurate indication of when the fan will switch on. Please note that if the fan is switched on
and off after the timer is set, this will erase the pre-scheduled timer.
• Press the timer off button whilst the fan is on to set a time for the fan to switch off within a 1-
9-hour range. Note, you can only set the timer in one-hour intervals. When the timer is set,
the digital display will alternate between the current wind speed and the duration until the fan
switches off (providing the display light has not been switched off). If the time frame that the
timer has been set to switch off in is beyond one hour, the number displayed next to the timer
will reduce by an hour after each hour that passes, to provide a more accurate indication of
when the fan will enter standby mode. Please note that if the fan is switched off and back on
after the timer is set, this will erase the pre-scheduled timer.
• Press the vertical OSC button for the fan to automatically swing left and right. If you require
the fan to stay in a desired position, press this button again and it will become fixed in this
position.
• Press the horizontal OSC button for the fan to automatically swing up and down. If you
require the fan to stay in a desired position, press this button again and it will become fixed in
this position.
• Press the mute button to mute or unmute the sound.
• Press the plus (+) speed button to increase the fans wind speed.
• Press the minus (-) speed button to decrease the fans wind speed.
• The remote control works within 3 metres at an angle of around 30 to 45 degrees.
To Next Page
Loading...
