Initial use 16
devolo dLAN 1000 mini
3.4 Removing a dLAN 1000 mini
from the network
To remove a dLAN 1000 mini adapter from an existing
network, press the encryption button on the corre-
sponding adapter for at least 10 seconds. The
adapter will automatically be assigned a new randomly
generated password and will thus no longer be able to
access the network. To integrate the device into a dif-
ferent network after this, follow the steps described in
Chapter 3.3 Connecting the dLAN 1000 mini, de-
pending on whether you are setting up a new network
or adding the device to an existing one.
To Next Page
Loading...
