Network configuration 24
devolo dLAN 1000 mini
be reached in the dLAN network, it will be added to
your network and displayed in the program.
Changing the network password
After you have added all desired dLAN devices to your
dLAN network, select the Change Password button
to assign a new joint network password. All adapters
present in your dLAN network are updated with the
new password automatically.
You can choose between your own password or a ran-
dom password. To define your own password, enter it
into the Network password text field (8 character
minimum). Alternatively, you can have a randomly se-
lected and highly secure password assigned using the
Generate secure password button. All present
adapters in your dLAN network will receive the new
password automatically.
The entered or automatically created password
can be shown in the text field in readable form
by activating the option "Show characters".
If devolo Cockpit is called up again later after a suc-
cessful initial installation, for example to integrate a
new adapter into a network, the application finds the
devices that were entered earlier. Enter the new device
as described in the Adding an adapter section.
To Next Page
Loading...
Need help?
General