|
Connection and installation
11
|
devolo MicroLink dLAN duo
|
EN
2.2 Connection and display elements
The MicroLink dLAN duo adapter has six indicator lights (LEDs) as well as an
Ethernet and a USB port:
ETH/USB
100/Act: Lit while 100 Mbps data transfer rate is active.
10/Act: Lit while 10 Mbps data transfer rate is active.
USB: Steady when connected to USB.
dLAN
Power: Steady when connected to power.
Act: Flashes when data is being sent or received over the electrical
lines.
Link: Steady when connected to the dLAN network.
Ethernet port: This is the connection point on the MicroLink dLAN duo
adapter for connecting it to a computer or another device with the net
-
work cable (included).
USB port: This is the connection point on the MicroLink dLAN duo
adapter for connecting it to a computer with the USB cable (included).
To Next Page
Loading...
Need help?
General