|
Connection and installation
13
|
devolo MicroLink dLAN duo
|
EN
햴 Windows provides you with two options for searching for drivers. Select
the 'Search for the best driver for your device (Recommended)' option and
click Next.
햵 The correct driver can be found on the devolo product CD. Activate the
'CD-ROM drive' option and deactivate all other boxes. Then click Next.
The driver installation is started.
햶 Click Next to continue the installation.
You may be prompted to insert the Windows 98 CD. Insert it into your CD-
ROM drive and click OK.
햷 By clicking Finish you'll exit the installation.
햸 Click Yes to any prompts to restart the computer.
...under Windows Me
햲 Put the devolo product CD in your CD-ROM drive.
햳 Windows starts the hardware wizard and reports that new hardware has
been detected. Confirm by clicking Next.
햴 Windows provides you with two options for searching for drivers. Select
the '
Automatic search for a better driver (Recommended)' option and click
Next. The driver installation is started.
햵 By clicking Finish you'll exit the installation.
햶 Confirm any prompts to restart the computer with Yes.
...under Windows 2000
햲 Put the devolo product CD in your CD-ROM drive.
햳 Windows 2000 starts the hardware wizard and reports that new hard-
ware has been detected. Click Next.
햴 The wizard offers two options to search for the driver. Select the 'Search
for a suitable driver for my device (recommended)' option and click Next.
햵 The correct driver can be found on the devolo product CD. Activate the
'CD-ROM drives' option and deactivate all other boxes. Then click Next.
The driver installation is started.
햶 Click Next to continue the installation.
To Next Page
Loading...
Need help?
General