TIME SET
Time can only be set when the Tread I is turned ON.
The TIME SET mode of the Tread 1 allows the user
to adjust the time.
To enter TIME SET mode:
TWIST crown CLOCKWISE and RELEASE.
The Tread 1 will stop advancing the second belt
to indicate the activation of TIME SET mode.
To adjust minute indicator belts one position:
TWIST crown CLOCKWISE and RELEASE.
To adjust minute indicator belts multiple positions:
TWIST crown CLOCKWISE and HOLD.
To adjust hour indicator belt one position:
TWIST crown COUNTER CLOCKWISE and RELEASE.
To adjust hour indicator belt multiple positions:
TWIST crown COUNTER CLOCKWISE and HOLD.
To exit TIME SET mode:
PUSH crown IN and RELEASE. The Tread 1 will
start advancing the second indication belt to
indicate the exit of TIME SET mode.
To Next Page
Loading...