ENGLISH
1
English (original instructions)
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk
of personal injury or property damage.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or seriousinjury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or seriousinjury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderateinjury.
(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in propertydamage.
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.
WARNING: To reduce the risk of injury, read the
instructionmanual.
If you have any questions or comments about this or
any
tool, call us toll free at:
1-800-4-
(1-800-433-9258).
1
Trigger switch
2
Forward/reverse button
3
Mode selector dial
4
Mode selector button
5
Side handle
6
Main handle
7
SDS-Plus tool holder
8
Sleeve
9
Depth rod
10
Depth rod release button
Fig. A
1
3
4
5
6
7 8
9
10
2
To Next Page
Loading...
Need help?
General
