EasyManuals Logo

DeWalt D25899K User Manual

DeWalt D25899K
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
12
English
Cleaning
WARNING: Blow dirt and dust out of
the main housing with dry air as often
as dirt is seen collecting in and around
the air vents. Wear eye protection when
performing thisprocedure.
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into aliquid.
Optional Accessories
WARNING: Since accessories, other
than those offered by D
e
WALT, have
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D
e
WALT recommended
accessories should be used with
thisproduct.
Consult your dealer for further information on the
appropriateaccessories.
Protecting the Environment
Separate collection. This product must
not be disposed of with normal
householdwaste.
Should you find one day that your D
e
WALT product
needs replacement, or if it is of no further use to
you, do not dispose of it with household waste.
Make this product available for separatecollection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
MAINTENANCE
Your D
e
WALT power tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning
WARNING: To reduce the risk of
injury, turn unit off and disconnect
machine from power source before
installing and removing accessories,
before adjusting or changing
set-ups or when making repairs.
Be sure the trigger switch is in the OFF
position. An accidental start-up can
causeinjury.
This machine is not user-serviceable. Take the
tool to an authorised
DeWALT
repair agent after
approximately 100 hours of use. If problems occur
before this time contact an authorised
DeWALT
repairagent.
Accessory Maintenance (fig. 9)
Accessory maintenance at the right time guarantees
optimal results in application and a long and efficient
accessorylife.
Grind the chisels on grinding discs. Refer to Figure 9
for the appropriate angles of the following chisels:
j. spade-shaped chisel
k. cold chisel
l. pointed chisel
m. U-shaped chisel
n. hollow chisel
o. mortar chisel
p. toothed chisel
WARNING: These chisels can be
reground only a limited number of
times. If in doubt, contact your dealer
forrecommendations.
WARNING: Ensure that the cutting
edge does not show discolouration
caused by too much pressure. This may
impair the hardness of theaccessory.
Lubrication
Your power tool requires no additionallubrication.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DeWalt D25899K and is the answer not in the manual?

DeWalt D25899K Specifications

General IconGeneral
Input power1500 W
Impact energy (max)17.9 J
Vibration level (chiseling)12 m/s²
Toolholder18 mm
Impact rate2040 bpm
Product colorBlack, Yellow
Weight and Dimensions IconWeight and Dimensions
Depth127 mm
Width650 mm
Height250 mm
Weight9900 g

Related product manuals