5
English
COMPONENTS (Fig. 1)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. On/off switch E. Tool holder
B. Main handle F. Side handle
C. Side handle clamping knob G. Retaining bolt
D. Tool retainer
FIG. 1
D25960
B
A
D
F
B
A
D
F
D25961
E
E
C
C
G
INTENDED USE
The D25960 and D25961 heavy-duty demolition hammers are
designed for professional demolition, chipping and chasing
applications. DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These heavy-duty demolition hammers are professional power
tools. DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use this tool.
Active Vibration Control
The active vibration control neutralizes rebound vibration from the
hammer mechanism. Lowering hand and arm vibration, it allows
more comfortable use for longer periods of time and extends the
life of the unit.
ASSEMBLY AND ADJUSTMENT
WARNING: Prior to assembly and adjustment always unplug the
tool.
WARNING: Always wear gloves when changing accessories.
The exposed metal parts on the tool and accessory may become
extremely hot during operation.
WARNING: Since accessories, other than those offered by
D
EWALT, have not been tested with this product, use of such
accessories with this tool could be hazardous. To reduce the risk
of injury, only D
EWALT, recommended accessories should be used
with this product.
NOTICE: To reduce dust contamination in the tool, keep dust and
debris away from the bit and the beat piece.
To Next Page
Loading...
Need help?
General
