21
english
Congratulations!
You have chosen a D
tool. Years of
experience, thorough product development and
innovation make
one of the most reliable
partners for professional power tool users.
Technical Data
D26480
Voltage V
AC
230
UK & Ireland V
AC
230/115
Type 1
Power input W 500
Belt speed m/min
365
Sanding surface mm 64 x 80
Belt length mm 356
Belt width mm 64
Weight kg 2.4
Noise values and vibration values (triax vector sum) according to
EN60745-2-4:
L
PA
(emission sound pressure level)
dB(A) 84
L
WA
(sound power level)
dB(A) 91
K (uncertainty for the given sound
level)
dB(A) 4.9
Vibration emission value a
h
= m/s
2
3.3
Uncertainty K = m/s
2
1.5
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off or
when it is running but not actually doing
BELT SANDER
D26480
English (original instructions)
the job. This may significantly reduce
the exposure level over the total working
period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
Fuses:
Europe 230V tools 10 Amperes, mains
U.K. & Ireland 230V tools 13 Amperes, in plugs
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate
injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
BELT SANDER
D26480
declares that these products described
under Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010,
EN60745-2-4:2009, +A11:2011.
To Next Page
Loading...
Need help?
General
