DeWalt D28115 User Manual

D28065, D28065N, D28066N, D28115, D28115N, D28116
Angle Grinders
Meuleuses à renvoi d’angle
Esmeriladoras de ángulo
INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DEWALT • www.dewalt.com

DeWalt D28115 Specifications

General

Power Source	Corded Electric
Wheel Diameter	4-1/2 in
Weight	4.6 lbs
Max. Disc Diameter	4-1/2 in
Length	12 in
AC/DC	AC
Spindle Thread	5/8-11 UNC
Switch Type	Slide

Summary

Definitions: Safety Guidelines

1) WORK AREA SAFETY

2) ELECTRICAL SAFETY

3) PERSONAL SAFETY

4) POWER TOOL USE AND CARE

5) SERVICE

SAFETY INSTRUCTIONS FOR ALL OPERATIONS

Common Safety Warnings for Operations

Specific safety advice for grinding, sanding, wire brushing, polishing, and cutting operations.

Kickback and Related Warnings

Safety Warnings Specific for Grinding and Abrasive Cutting-Off Operations

Additional Safety Warnings Specific for Abrasive Cutting-Off Operations

Safety Warnings Specific for Sanding Operations

Safety Warnings Specific for Polishing Operations

Safety Warnings Specific for Wire Brushing Operations

Additional Safety Information

Tool Symbols and Label Information

Extension Cord Guidelines

Minimum Gauge for Cord Sets

COMPONENTS (Fig. 1)

Key Components and Features

Lists major components like trigger switch, guards, handles, and flanges for tool operation and safety.

Accessory Visuals: Grinding Wheels, Sanding Discs, Wire Wheels

Accessory Visuals: Cutting Wheels

Accessory Visuals: Cutting Wheels (6-inch)

Accessory Visuals: Cutting Wheels (4.5/5-inch)

INTENDED USE

Accessory Visuals: Sanding Flap Discs

ASSEMBLY AND ADJUSTMENTS

Mounting the Guard

Step-by-step guide on how to mount and remove the protective guard.

Attaching Side Handle

Rotating the Gear Case

Accessories Overview

Operation Procedures

Guards and Flanges for Operation

Importance of using correct guards and flanges for accessories and safety during operation.

Trigger Switch Operation

How to operate the trigger switch for starting, stopping, and locking on the tool.

Lock-On and Lock-Off Buttons

Explanation of lock-on and lock-off button functions for extended use and control.

SPINDLE LOCK

Mounting Depressed Center Wheels and Flap Discs

Mounting Hubbed Wheels

Steps for installing and removing hubbed wheels onto the threaded spindle.

Mounting Non-Hubbed Wheels

Procedure for mounting non-hubbed wheels using flanges and clamp nuts.

Surface Grinding with Grinding Wheels

Edge Grinding with Grinding Wheels

Surface Finishing with Sanding Flap Discs

Mounting Sanding Backing Pads

Using Sanding Backing Pads

Precautions When Sanding Paint

Personal Safety for Paint Sanding

Safety measures for individuals in the work area during paint sanding.

Environmental Safety for Paint Sanding

Measures to minimize dust and prevent environmental contamination during paint sanding.

Cleaning and Disposal Procedures

Mounting Wire Brushes and Wire Wheels

Using Wire Cup Brushes and Wire Wheels

Mounting and Using Cutting (Type 1) Wheels

Mounting the Closed Type 1 Guard

Steps for mounting the closed Type 1 guard for cutting wheel safety.

Mounting Type 1 Cutting Wheels

Using Type 1 Cutting Wheels

Maintenance and Accessories

Tool Cleaning Procedures

Procedures for cleaning the tool's air vents and parts.

Accessory Recommendations

Recommendations for using DEWALT-approved accessories.

Repairs

Product Registration

Warranty Information

Limited Warranty Coverage

Explains the Three Year Limited Warranty, including what is covered and excluded.

Additional Services and Notes

Covers 1 Year Free Service, 90 Day Guarantee, Latin America, and label replacement.