To Next PageTo Next Page
Need help?Do you have a question about the DeWalt D28112 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Spindle Thread | 5/8-11 in |
| Weight | 4.6 lbs |
| Length | 12.5 inches |
| Voltage | 120V |
| AC/DC | AC |
| Wheel Diameter | 4.5 inches |
| No Load Speed | 11000 RPM |
| Max. Disc Diameter | 4.5 inches |
Identifies grinder models and provides contact details for questions or comments.
Explains signal word definitions and provides essential safety warnings for power tool operation.
Covers safety precautions for the work environment and electrical connections.
Details personal protective equipment and safe practices for user well-being.
Guidelines for proper tool operation, maintenance, and storage to prevent hazards.
Broad safety rules applicable to all grinding, sanding, and cutting operations.
Instructions for tool servicing, ensuring safety and proper functionality.
Specific safety precautions for abrasive cutting operations.
Safety rules and precautions for sanding tasks.
Safety precautions to be followed during polishing operations.
Specific safety instructions for wire brushing operations.
Further essential safety guidelines for operating angle grinders.
Guidance on using extension cords and understanding tool safety symbols.
Lists and illustrates the various parts and accessories of the grinder.
Defines the tool's purpose and specifies necessary operator supervision.
Instructions for initial assembly and making necessary adjustments.
Steps for correctly mounting different types of grinding and wire wheels.
Procedure for adjusting the orientation of the gear case.
Details various cutting discs, sanding discs, and flap discs for the tool.
Detailed steps for installing and removing the protective guard.
Key operational guidelines for safe and effective tool use.
Instructions on how to operate the paddle switch for tool control.
Instructions on how to operate the slider switch for tool control.
Explanation of the lock-on feature and the spindle lock mechanism.
Steps for correctly mounting depressed center grinding wheels.
Proper technique for performing surface grinding operations.
Proper technique for performing edge grinding operations.
Guidance on using flap discs for surface finishing.
Steps for correctly mounting sanding backing pads.
Advice on grit selection and technique for using sanding pads.
Instructions for mounting and using wire brushes and wheels.
Instructions for mounting and using Type 1 cutting wheels.
Steps for installing the protective guard for cutting wheels.
Instructions for mounting cutting wheels onto the spindle.
Procedures for regular tool upkeep and cleaning.
Information on recommended accessories, repairs, and DEWALT support.
Benefits and process for registering the DEWALT product.
Details on the limited warranty, free service, and money-back guarantee.
