Need help?Do you have a question about the DeWalt D51825-XE and is the answer not in the manual?
Introduces the DeWalt D51825-XE (31° Clipped Head) and D51850-XE (20° Full Round Head) framing nailers.
Illustrates and labels the external parts of the framing nailer for identification.
Details technical specifications for both nailer models and accepted nail types.
Explains the meaning of safety signal words like DANGER, WARNING, and CAUTION.
Provides overarching safety precautions applicable to all power tools.
Outlines critical safety measures specific to operating pneumatic tools.
Explains the difference and use of bump action vs. sequential action triggers.
Provides step-by-step instructions for removing and installing the trigger assembly.
Guides on how to properly install the air fitting for tool connection.
Covers tool preparation, and operational considerations for cold and hot weather.
Details how to actuate the tool, load fasteners, and use the lock-off feature.
Explains how to adjust the depth setting for nail insertion.
Provides a daily checklist for tool maintenance to ensure proper function.
Outlines the limited warranty, service contract, and guarantee details.
Covers procedures for cleaning, repairs, and recommended accessories.
Lists common problems and their respective solutions for the framing nailer.
To Next Page
General
