CORDLESS ROTARY HAMMER DRILL
DC212/DC213*
Technical data
DC212 DC213
Voltage V 18 18
No-load speed min
-1
0 - 1,100 0 - 1,100
Load speed min
-1
- 0 - 800
Impact energy J 2.0 2.1
Maximum drilling range in
steel/wood/concrete mm 10/26/20 10/26/20
Tool holder SDS-plus
®
SDS-plus
®
Collar diameter mm 54 54
Weight (without battery pack) kg 2.2 2.2
Battery pack DE9098
Battery type NiCd
Voltage V
DC
18
Capacity Ah 2.4
Weight kg 1.
Charger DE9116
Mains voltage V
AC
230
Battery type NiCd/NiMH
Approx. charging time min 60/70
Weight kg 0.4
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard.
EC-Declaration of conformity
DC212/DC213
DE WALT declares that these power tools have been
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, 86/188/EEC, EN 60745,
EN 55014-2, EN 55014, EN 50260, EN 60335,
EN 61000-3-2 & EN 61000-3.
Level of sound pressure:
DC212 DC213
L
WA
(acoustic power) dB(A) 96 96
K
WA
(measurement uncertainty) dB(A) 1.9 1.9
Weighted RMS acceleration value:
DC212 DC213
a
h,HD
m/s
2
8.0 8.0
measurement uncertainty m/s
2
1.5 1.5
Director Engineering and Product Development
Horst Großmann
DE WALT, Richard-Klinger-Straße 11
D-65510, Idstein, Germany
Important Notice:
Not all models shown in this manual are available in Korea
Labels on charger and battery pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
100%
Battery charging
100%
Battery charged
Battery defective
Do not probe with conductive objects
Do not charge damaged battery packs
Read instruction manual before use
Use only with D EWALT battery packs,
others may burst, causing personal injury
and damage
Your D EWALT charger is double
insulated in accordance with EN 60745.
3
To Next Page
Loading...
Need help?
General
