To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DCH213 and is the answer not in the manual?
General| Type | Rotary Hammer |
|---|---|
| Voltage | 18V |
| Power Source | Battery |
| Chuck Type | SDS-Plus |
| Battery Type | Lithium-Ion |
| Max. Drilling Capacity in Steel | 1/2 inch |
| No Load Speed | 0-1100 rpm |
General safety warnings applicable to all power tools, emphasizing reading instructions to prevent injury.
Specific safety advice for rotary hammers: hearing protection, auxiliary handle, grip, vibration management, and bit handling.
Mandatory use of safety goggles or eye protection to prevent permanent eye damage from flying chips.
Warnings about dust from construction activities and associated chemical risks, advising ventilation and protective gear.
Mandatory use of hearing protection (ANSI S12.6) and eye protection (ANSI Z87.1) during operation.
Detailed safety instructions for Li-Ion battery packs regarding fire hazards, skin contact, and disposal.
Instructions on installing the side handle for better tool control and safety.
Instructions for operating the variable speed trigger switch and mode selector for drilling, hammering, and chipping.
How to use the side handle and apply pressure for optimal vibration control and tool engagement.
Detailed guide on performing drilling operations, including bit selection, pressure, and handling stalls.
Guidelines for effective hammer drill operation, including force, bit angle, and clearing deep holes.
Procedure for performing chipping and chiselling tasks using the tool and its accessories.
