Need help?Do you have a question about the DeWalt DCH253 and is the answer not in the manual?
General| Power source | Battery |
|---|---|
| Battery voltage | 18 V |
| Impact rate | 4500 bpm |
| Rated speed (max) | 1200 RPM |
| Impact energy (max) | 2.1 J |
| Drilling diameter in wood (max) | 26 mm |
| Drilling diameter in steel (max) | 13 mm |
| Vibration level (metal drilling) | 2.5 m/s² |
| Vibration level (hammer drilling) | 6.6 m/s² |
| Drilling diameter in concrete (max) | 24 mm |
| Reverse | Yes |
| Product color | Black, Yellow |
Weight and Dimensions| Depth | 301 mm |
|---|---|
| Width | 85 mm |
| Height | 202 mm |
| Weight | 2500 g |
Measured vibration emission levels for different operating modes according to EN 60745.
Explains safety signal words, symbols, and EC conformity declarations.
Official statement of product compliance with relevant EU directives and standards.
Essential safety rules covering work environment, electrical hazards, and personal protection.
Defines the product's intended applications.
Steps for initial assembly and adjustments of the tool.
Explains usage of switches, modes, and handles for effective tool operation.
How to use the variable speed trigger for control and different applications.
How to switch between rotary drilling, hammer drilling, and hammering modes.
Procedures for tool upkeep, lubrication, and cleaning to ensure longevity and safety.
Instructions on how to clean the tool safely and effectively.
To Next Page
