Need help?Do you have a question about the DeWalt DCH273P2 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Max Impact Energy | 2.1 J |
| Chuck Type | SDS-Plus |
| Battery Included | Yes |
| Battery Capacity | 5.0 Ah |
| Max. Drilling Capacity [Concrete] | 24 mm |
| Max. Drilling Capacity [Steel] | 13 mm |
| Tool Holder | SDS-Plus |
| Maximum Concrete Drilling Diameter | 24 mm |
| Impact Energy | 2.1 J |
| Vibration Control | Yes |
| Included Accessories | Charger |
| Battery Type | Li-Ion |
| Type | Cordless Rotary Hammer |
| Hammering Mode | Rotary Hammer |
| No Load Speed | 0-1, 100 rpm |
Details noise and vibration levels measured according to EN60745-2-6.
Vibration emission values for drilling into concrete.
Vibration emission values for chiselling operations.
Vibration emission values for drilling into metal.
Vibration emission values for screwdriving operations.
Defines the DANGER signal word for imminently hazardous situations.
Defines the WARNING signal word for potentially hazardous situations.
Defines the CAUTION signal word for potentially hazardous situations.
Defines the NOTICE signal word for practices not related to personal injury.
Symbol indicating risk of electric shock.
Symbol indicating risk of fire.
Guidelines for maintaining a safe and clean work environment.
Precautions for safe electrical connection and use of the tool.
Recommendations for operator safety, including alertness and PPE.
Recommendation to wear ear protection due to noise exposure.
Importance of using auxiliary handles for control.
Use insulated surfaces when contacting live wires.
Secure the workpiece using clamps or other methods.
Recommendation to wear safety goggles for eye protection.
Risk of injury from touching rotating or hot tool parts.
Potential risk of hearing impairment due to noise.
Hazard of squeezing fingers when changing accessories.
Health risks associated with breathing dust.
Pictogram indicating to read the instruction manual before use.
Pictogram indicating requirement for ear protection.
Pictogram indicating requirement for eye protection.
Warning regarding shock hazard from liquids in charger.
Recommendation for using a residual current device.
Caution regarding burn hazard when charging batteries.
Caution to supervise children around the charger.
Notice about keeping foreign material away from charger.
Step-by-step instructions for charging a battery pack.
Explanation of charger indicators and charge status.
Charger feature that suspends charging for temperature-sensitive batteries.
Information on the electronic protection system for Li-Ion battery packs.
Guidelines for optimal storage of battery packs.
Explanation of pictographs used on chargers and battery packs.
Instructions for installing and removing the battery pack.
How to check the remaining charge level on battery packs.
Mode for screwdriving and drilling into steel, wood, and plastics.
Mode for concrete and masonry drilling.
Mode for light chipping operations.
General safety instructions and warnings before operating the tool.
Correct hand positioning for safe and controlled operation.
Procedures for performing drilling and hammering operations.
Information on the lubrication requirements of the power tool.
Instructions for cleaning the power tool and its parts.
Guidelines for safely cleaning the battery charger unit.
To Next Page
