D
A
E
B
F
G
L
J
I
H
M
N
FIG. 2
K
C
J
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal injury,
depress the switch lock-off button and diconnect battery
pack before making any adjustments or removing/installing
attachments or accessories. An accidental start-up can cause
injury.
H
FIG. 3
G
M
L
O
P
F
LOOSEN (CLOCKWISE)
FIG. 4
TIGHTEN
(COUNTERCLOCKWISE)
Changing Blades (Fig. 3, 4)
The DC300 is equipped with a keyless blade clamp (H) and is designed
to be tightened by hand. The use of external tools may cause damage
to this blade clamp.
To Install the Blade:
1. Place inner clamp washer (O) on saw spindle with the large fl at
surface facing out toward the blade (Fig. 3).
English
11
To Next Page
Loading...
