To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DCS570 and is the answer not in the manual?
General| Max Speed | 5500 RPM |
|---|---|
| Depth of Cut at 45 degrees | 1-5/8 inches |
| Weight | 7.5 lbs |
| Electric Brake | Yes |
| Dust Port | Yes |
| Blade Diameter | 7-1/4 inches |
| Bevel Capacity | 57 degrees |
| Depth of Cut at 90 degrees | 2-9/16 in |
| Battery Type | 20V MAX Lithium-Ion |
Defines DANGER, WARNING, CAUTION, NOTICE symbols.
Guidelines for safe operation environment and conditions.
Precautions regarding power supply and grounding.
Staying alert, using PPE, preventing unintentional starts, proper dress.
Forcing tools, switch operation, adjustments, storage, and maintenance.
Recharge instructions, storage, and safe handling of battery packs.
Requirements for qualified repair services and part replacement.
Hand placement, guard use, depth adjustment, workpiece support, and blade handling.
Explains kickback and provides operator prevention measures.
Procedures for checking and ensuring proper function of the lower blade guard.
Guidelines for safety glasses, masks, and handling chemical dust.
Explains how to read and interpret the battery charge indicator lights.
Details about the RBRC seal and battery recycling programs.
Crucial safety warnings and instructions for operating battery chargers.
Step-by-step guide for charging a DeWALT battery pack.
Explains the meaning of different indicator lights on the charger.
Explains the charger's feature to delay charging for hot or cold batteries.
Describes the tool's system for protecting against overload or deep discharge.
Guidance on how to securely mount the charger on a wall.
Instructions for safely cleaning the battery charger.
Notes on temperature, battery warming, and charging rates for best performance.
Warnings about turning off the tool before adjustments or accessory changes.
Steps for correctly installing and removing the battery pack.
Explains how to use the trigger switch and its lock-off feature.
Step-by-step instructions for safely changing the saw blade.
Importance of the lower blade guard and checks for proper function.
Table listing recommended blade types for different applications.
Explains kickback and provides operator prevention measures.
How to set the saw's cutting depth for optimal results.
Instructions for setting the saw's bevel angle for angled cuts.
How to adjust the saw shoe for precise 90° cuts.
How to use the kerf indicator for guiding cuts.
Importance of supporting materials correctly to prevent injury and loss of control.
Guidance on placing the shoe, handling cuts, and managing stalling.
Explanation of ripping and recommendation for using a rip fence.
Step-by-step guide for performing pocket cuts safely.
Warning about turning off the tool before maintenance.
How to clean the tool using air and mild soap solutions.
Warning about using only DeWALT recommended accessories for safety.
Guidance on where to get repairs and the non-serviceable nature of some parts.
Reasons for registering the product online, like warranty service.
Details of the three-year warranty, exclusions, and free service.
Lists battery models covered under the 2-year free service.
Lists battery models covered under the 3-year free service.
Conditions under which the battery pack warranty is voided.
Information on the satisfaction guarantee and refund policy.
Statement that warranty does not apply to products sold in Latin America.
How to obtain free replacement warning labels if missing or illegible.
