Need help?Do you have a question about the DeWalt XR FLEX VOLT DCS520 and is the answer not in the manual?
General| Type | Cordless Circular Saw |
|---|---|
| Blade Diameter | 7-1/4 in |
| Arbor Size | 5/8 in |
| No Load Speed | 5800 RPM |
| Power Source | Battery |
| Voltage | 60V |
| Battery Type | Li-Ion |
| Bevel Capacity | 57 degrees |
Welcoming message from DEWALT.
Lists specifications like voltage, blade diameter, and weight.
States compliance with EU directives.
Explains safety symbols and their meaning.
Crucial safety instructions for all power tools.
Guidelines for safe operation environment.
Precautions related to electrical safety.
Advice on operator's personal safety.
Instructions on operating and maintaining the tool.
Guidelines for battery usage and care.
Information on tool servicing and repair.
Specific safety rules for saws.
Safety tips related to the riving knife.
Specific safety advice for plunge saws.
Explains kickback and how to prevent it.
Further safety points for plunge saws.
Identifies unavoidable residual risks.
Reminder to save safety instructions.
Overview of DEWALT chargers.
Electrical safety precautions for chargers.
Instructions for replacing the mains plug.
Critical safety information for battery chargers.
How to operate the charger and interpret indicators.
Explanation of the delay feature for battery temperature.
Describes the tool's electronic protection system.
Instructions for wall mounting the charger.
Safety warnings for cleaning the charger.
Important safety instructions for all battery packs.
Safety regulations for battery transportation.
Specific instructions for transporting FLEXVOLT batteries.
Advice on optimal battery storage.
Information on pictograms on labels.
Information on the compatible battery types.
Lists items included in the package.
Identifies pictograms shown on the tool.
Detailed description of tool parts with numbers.
Specifies the tool's intended purpose.
Instructions for assembling and adjusting the tool.
Steps for installing and removing the battery.
Explanation of the battery fuel gauge.
How to adjust the bevel angle.
Procedure for changing the saw blade.
Steps for adjusting the riving knife.
How to set the cutting depth.
Information about wireless tool control feature.
Instructions and warnings for performing plunge cuts.
How to use the guide rail system for precise cuts.
Instructions for trimming and using the anti-splinter guard.
Basic steps for performing cuts with the saw.
How to adjust the cutting speed.
Specific instructions for cutting doors.
How to connect and use dust extraction.
General maintenance guidelines for the tool.
Information on lubrication requirements.
Procedures and warnings for cleaning the tool.
Information on using recommended accessories.
Guidelines for product and battery disposal.
Instructions for recharging and disposing of battery packs.
To Next Page
