1
Angled 34˚
J
G
L
E
D
A
F
A. Trigger
B. Contact trip lock-off
C. Depth adjustment
wheel
D. Headlights/Low
battery indicator
E. Jam clearing latch
F. Contact trip
G. Magazine
H. Pusher
I. Reversible
suspension hook
J. No-mar pad
K. No-mar tip storage
Angled
Nail 32 mm, 38 mm, 51 mm, 65 mm
Lengths (1-1/4", 1-1/2", 2", 2-1/2")
Shank Diameters 15 gauge
Nail Stick Angles 34˚
NAIL SPECIFICATIONS
FIG. 1
H
Firing Mode Sequential Fire Only
Voltage 18
Height 305 mm (12")
Width 127 mm (5")
Length 356 mm (14")
Weight 4.07 kg (8.9 lbs.)
Magazine Angle 34˚
Loading Capacity Up to 110 nails
TOOL SPECIFICATIONS
B
H
E
K
C
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal
word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may result in
property damage.
NOTE: DC629-XE (Australia and New Zealand)
The bump feed on this model has
been defeated. This tool will only fire in
sequential mode
To Next Page
Loading...
Need help?
General
