Need help?Do you have a question about the DeWalt DC721 and is the answer not in the manual?
General| Voltage | 18 V |
|---|---|
| Weight | 5.2 lbs |
| No Load Speed | 0-450 / 0-1, 500 rpm |
| Type | Drill Driver |
| Chuck Size | 1/2 inch |
| Speed | 0-450/0-1, 500 rpm |
| Battery Type | Ni-Cd |
Electrical potential of the tool's battery.
Type of battery chemistry used (NiCd, Li-Ion, etc.).
Electrical power rating of the tool in Watts.
Rotational speed without load, in RPM, for gears.
Blows per minute for hammerdrill function.
Maximum rotational force the tool can apply.
Maximum bit shank diameter the chuck can hold.
Maximum hole diameter for Wood, Metal, Masonry.
Tool weight without the battery pack.
Vibration level when drilling metal.
Vibration level when drilling concrete.
Vibration level when performing screwdriving.
Technical details for various DEWALT battery packs.
Technical details for DEWALT battery chargers.
Definition of the highest hazard level.
Definition of a potentially hazardous situation.
Definition of a potentially hazardous situation with minor injury risk.
Definition for practice not related to personal injury.
Explanation of symbols shown on the tool.
Safety guidelines for the operating environment.
Safety guidelines related to power connection.
Guidelines for operator safety and PPE.
Best practices for using and maintaining the tool.
Safety related to noise and hearing protection.
Importance of using supplied auxiliary handles.
How to properly secure the workpiece.
Inherent risks that cannot be fully avoided.
Basic safety rules for charger operation.
Guidelines for using extension cords safely.
Recommendations for charger location.
Precautions for cleaning and upkeep.
Step-by-step guide for charging batteries.
Feature for charging batteries at non-optimal temperatures.
Specifics of Li-Ion battery protection system.
General safety advice for all battery packs.
Safety for Nickel Cadmium/Metal Hydride packs.
Safety for Lithium-Ion packs.
Instructions for using the protective battery cap.
Details on voltage for different models.
Guidelines for storing battery packs.
List of items included in the product package.
Identification of parts of the tool.
Description of the tool's proper applications.
Safety precautions related to the electrical motor.
Instructions for replacing the UK/Ireland plug.
Guidelines for using extension cords with the charger.
Procedure for battery pack insertion and removal.
Recommended way to hold the tool for safety.
How to use the trigger for speed control.
Operation of the direction switch.
Setting the clutch for screwdriving.
Shifting between low and high speed gears.
How to insert and remove drill bits.
Instructions for standard drilling.
Instructions for drilling into masonry.
Care and upkeep instructions for the power tool.
How to clean the tool housing and vents.
Instructions for cleaning the battery charger.
Information on compatible accessories.
Guidance on product disposal and recycling.
Procedures for responsible product disposal.
Details on product warranty and service.
To Next Page
