Need help?Do you have a question about the DeWalt DC727 and is the answer not in the manual?
General| Voltage | 18 V |
|---|---|
| No Load Speed | 0-450 / 0-1, 500 rpm |
| Battery Type | NiCd |
| Type | Drill Driver |
| Chuck Size | 1/2 inch |
Guidelines for maintaining a safe and well-lit work area, avoiding explosive atmospheres, and keeping bystanders away.
Advice on staying alert, using personal protective equipment, preventing unintentional starts, and maintaining proper footing.
Guidance on not forcing tools, proper maintenance, and safe storage to prevent accidents and ensure longevity.
Specific safety precautions for drill/driver/hammerdrill tools, including noise exposure and proper handling.
Step-by-step guide for inserting the battery pack into the charger.
Safety advice for Nickel Cadmium and Nickel Metal Hydride battery packs regarding leakage and disposal.
Safety advice for Lithium Ion battery packs concerning skin contact and flammability.
Highlights electrical safety related to tool voltage and charger insulation.
Detailed steps for installing and removing the battery pack from the tool.
General advice on operating the tool safely and according to regulations.
Illustrates and explains the correct way to hold the tool for safety and control.
Explains how to operate the trigger switch for variable speed and braking.
To Next Page
