DeWalt DC750 Manual

9
Discard the battery pack with due care
for the environment
Do not incinerate the battery pack
Package contents
The package contains:
1 Cordless drill/driver
1 Charger
2 Battery packs
1 Screwdriver bit
1 Kitbox (K-models only)
1 Instruction manual
Check for damage to the tool, parts or
accessories which may have occurred during
transport.
Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. 1)
Your cordless drill/driver DC740
DC733
// DC750 has
been
designed for professional drilling and
screwdriving
applications.
a Variable speed switch
b Forward/reverse slider
c Keyless chuck
d Mode selector/torque adjustment collar
e Collar settings
f Two gear selector
g Ventilation slots
hGrip
i Battery pack
Charger
i Battery pack
j Release buttons
k Charger
l Charging indicator (red)
Electrical safety
The electric motor has been designed for one
voltage only. Always check that the battery pack
voltage corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your D
EWALT charger is double
insulated in accordance with EN 60745.
Your DE9116 charger accepts D
EWALT NiCd and
NiMH battery packs ranging from 7.2 V to 18 V.
Your DE9118 charger accepts D
EWALT NiCd battery
packs ranging from 7.2 V to 14.4 V.
The DE9135 charger accepts 7.2 to 18 V NiCd,
NiMH or Li-Ion batteries.
These chargers require no adjustment and are
designed to be as easy as possible to operate.
ENGLISH
Using an extension cable
An extension cord should not be used unless
absolutely necessary. Use an approved extension
cable suitable for the power input of your charger
(see technical data). The minimum conductor size is
1 mm
2
; the maximum length is 30 m.
Assembly and adjustment
Prior to assembly and adjustment,
always remove the battery pack.
Always switch off the tool before
inserting or removing the battery pack.
Use only DEWALT battery packs and
chargers.
Battery pack (fig. 2 & 3 )
Charging Procedure
DANGER: Electrocution hazard.
230 volts present at charging terminals.
Do not probe with conductive objects.
Danger of electric shock or lectrocution.
1. Plug the charger (k) into an appropriate outlet
before inserting battery pack.
2. Insert the battery pack into the charger. The red
(charging) light will blink continuously indicating

DeWalt DC750 Specifications

General

Brand	DeWalt
Model	DC750
Category	Drill
Language	English