ENGLISH
9
Battery charged
Battery defective
Hot\cold pack delay
Do not probe with conductive objects.
Do not charge damaged battery packs
Use only with DEWALT battery packs,
others
may burst, causing personal injury
and
damage.
Do not expose to water.
Have defective cords replaced
immediatel
y.
Charge only between 4 °C and 40 °C.
Discard the battery pack with due care for
the
environment.
Do not incinerate the battery pack
NiMH,
NiCd+ and Li-Ion.
Charges NiMH and NiCd
battery
packs.
Charges Li-Ion battery packs.
See technical data for charging time.
Package Contents
The package contains:
1 Cordless hammerdrill
1 Side handle
2 Battery packs
1 Charger
1 Instruction manual
1 Exploded drawing
NOT
E: Battery packs and chargers are not included
with
N-models.
• Check for damage to the tool, parts or
accessories
which may have occurred during
transport
.
• Take the time to thoroughly read and
understand
this manual prior to operation.
Description (fig. 1–5)
WARNING: Never modify the power
tool
or any part of it. Damage or
personal
injury could result.
a. Trigger switch
b. Forward/reverse control button
c. Mode control collar
d. Torque adjustment collar
e. Gear shifter
f. Chuck sleeve
g. battery release buttons
INTENDED
USE
Your DC927 hammerdrill has been designed for
professional drilling, hammer drilling and screwdriving
application
s
DO
NOT use under wet conditions or in presence of
flammable
liquids or gases.
These
hammerdrills are professional power tools.
DO
NOT let children come into contact with the
tool.
Supervision is required when inexperienced
operators
use this tool.
Electrical Safety
The electric motor has been designed for one
voltage
only. Always check that the battery pack
voltage
corresponds to the voltage on the rating
plate.
Also make sure that the voltage of your
charger
corresponds to that of your mains.
Your DEWALT charger is double insulated
in
accordance with EN 60335; therefore
no
earth wire is required.
If
the supply cord is damaged, it must be replaced
by
a specially prepared cord available through the
DEWALT service organization.
Mains Plug Replacement
(U.K. & Ireland Only)
DANGER:
• Should your mains plug need replacing and you
are
competent to do this, proceed as instructed
belo
w. If you are in doubt, contact an authorized
DEWALT repair agent or a qualified electrician.
To Next Page
Loading...
