ENGLISH
6
ADDITIONAL SPECIFIC SAFETY RULES
Drill/Driver/Hammerdrill Safety
Warnings
• Wear ear protectors with impact drills.
Exposure
to noise can cause hearing loss.
• Hold power tools by insulated gripping
surfaces
when performing an operation
where
the cutting tool may contact hidden
wiring
or its own cord. Cutting accessory
contacting
a “live” wire may make exposed
metal
parts of the tool “live” and shock the
operato
r.
• Use auxiliary handles supplied with the tool.
Loss
of control can cause personal injury.
• Use clamps or other practical way to secure
and
support the workpiece to a stable
platform.
Holding the work by hand or against
your
body is unstable and may lead to loss of
control
.
• Wear ear protectors when hammering
for
extended periods of time. Prolonged
exposure
to high intensity noise can cause
hearing
loss. Temporary hearing loss or serious
ear
drum damage may result from high sound
levels
generated by hammerdrilling.
• Wear safety goggles or other eye protection.
Hammering
and drilling operations cause chips
to
fly. Flying particles can cause permanent eye
damage
.
• Hammer bits and tools get hot during
operation.
Wear gloves when touching them.
Labels on Tool
DATE CODE POSITION
Date
Code, which also includes the year of
manufactu
re, is printed into the housing surface that
forms
the mounting joint between tool and battery!
Example
:
2007
XX XX
Year of Manufacture
Important Safety Instructions for All
Battery Chargers
SAVE THESE INSTRUCTIONS: This manual
contains
important safety and operating instructions
for
the DE9130/DE9135 battery chargers.
• Before using charger, read all instructions and
cautiona
ry markings on charger, battery pack,
and
product using battery pack.
DANGER: Electrocution hazard.
230
volts are present at charging
terminals.
Do not probe with conductive
objects.
Electric shock or electrocution
may
result.
WARNING: Shock hazard. Do not allow
any
liquid to get inside charger. Electric
shock
may result.
CAUTION: Burn hazard. To reduce
the
risk of injury, charge only DEWALT
rechargeable
batteries. Other types of
batteries
may burst causing personal
inju
ry and damage.
CAUTION: Under certain conditions,
with
the charger plugged in to the
power
supply, the exposed charging
contacts
inside the charger can be
shorted
by foreign material. Foreign
materials
of a conductive nature such
as,
but not limited to, steel wool,
aluminum
foil, or any buildup of metallic
particles
should be kept away from
charger
cavities. Always unplug the
charger
from the power supply when
there
is no battery pack in the cavity.
Unplug
charger before attempting to
clean
.
• Do not attempt to charge the battery pack
with
any chargers other than the ones in
this
manual. The charger and battery pack are
specifically
designed to work together.
• These chargers are not intended for
any
uses other than charging DEWALT
rechargeable
batteries.Any other uses
may
result in risk of fire, electric shock or
electrocution
.
• Do not expose charger to rain or snow.
• Pull by plug rather than cord when
disconnecting
charger. This will reduce risk
of
damage to electric plug and cord.
• Make sure that cord is located so that it
will
not be stepped on, tripped over, or
otherwise
subjected to damage or stress.
• Do not use an extension cord unless it
is
absolutely necessary. Use of improper
extension
cord could result in risk of fire,
electric
shock, or electrocution.
• Do not place any object on top of charger
or
place the charger on a soft surface that
might
block the ventilation slots and result
in
excessive internal heat. Place the charger
in
a position away from any heat source. The
To Next Page
Loading...
