To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DCCS623 and is the answer not in the manual?
General| Type | Pole Saw |
|---|---|
| Power Source | Battery |
| Max Cutting Diameter | 8 in |
| Oiling System | Automatic |
| Tool Height | 8 in |
| Voltage | 20V MAX |
| Bar Length | 8 inches |
| Chain Gauge | 0.043 inch |
| Battery Compatibility | DeWalt 20V MAX batteries |
Keep work area clean, well lit, and free from flammable materials.
Follow electrical safety rules, use outdoor cords and GFCI where needed.
Stay alert, use PPE, prevent unintentional starting, dress properly.
Proper use, care, storage, and servicing of the power tool.
Guidelines for using and caring for battery packs and chargers.
Correct grip, stance, and precautions during pruner use.
Safety when operating in specific environments and maintaining balance.
Explains how kickback occurs and how operators can prevent it.
Details precautions to reduce kickback during operation.
Describes features like guide bars and chains designed to reduce kickback.
Provides definitions for pruner parts and operational terms.
Covers modifications, PPE, dust exposure, and hearing protection.
Explains the meaning of symbols found on the tool's label.
Crucial safety guidelines for using and handling battery packs.
Advice on storing, cleaning, and transporting battery packs.
Information on battery packs equipped with a fuel gauge.
Step-by-step guide for charging battery packs, including indicators.
Explains hot/cold pack delay and its indication.
Details on electronic protection and important charging considerations.
Steps for attaching the guide bar and saw chain to the pruner.
Procedure for properly tensioning the saw chain for optimal use.
Instructions for removing and installing a new saw chain.
Details on the auto oiling system and how to fill the reservoir.
Guidance on storing the scabbard, wrench, and bar tip guard.
Safely transporting the pruner with battery removed and guide bar covered.
Steps for inserting and removing the battery pack from the tool.
Instructions on turning the pruner on/off and basic operation.
How to use the lock-off lever and trigger switch for operation.
How to safely remove branches from a fallen tree.
How to cut logs into lengths, including safety tips.
How to clean air vents and tool parts safely.
Cleaning the saw chain and guide bar after use.
Instructions for cleaning the sprocket and sprocket cover.
Information on using DEWALT recommended accessories for safety.
Tips and procedures for sharpening the saw chain correctly.
Guidelines for product repairs and servicing.
How to register the product and warranty terms.
Addresses common problems like unit not starting, battery issues, and overheating.
Lists compatible battery packs and chargers for 20V Max* systems.
Lists compatible battery packs and chargers for 60V Max* systems.
