DeWalt DCD1007 User Manual

ENGLISH
55
EC‑Declaration of Conformity
Machinery Directive
Impact Drill
DCD1007
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN 62841‑1:2015+A11:2022 EN
62841‑2‑1:2018+A11:2019+A1:2022+A12:2022 .
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice‑President Engineering, PTE‑Europe
DeWALT, Richard‑Klinger‑Straße 11,
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN 62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of workpatterns.
DCD1007
Drilling into metal
Vibration emission value a
h,D
= m/s
2
< 2.5
Uncertainty K = m/s
2
1.5
Impact drilling
Vibration emission value a
h,ID
= m/s
2
12
Uncertainty K = m/s
2
1.5
DCD1007
Voltage V
DC
18
Type 1
Battery type Li‑Ion
No load speed Drill, Driver/Impact drill
Speed 1 drill/hammer min‑1 0–450/0–500
Speed 2 drill/hammer min‑1 0–1200/0–1300
Speed 3 drill/hammer min‑1 0–2000/0–2250
Impact rate
Speed 1 min‑1 0–8500
Speed 2 min‑1 0–2210
Speed 3 min‑1 0–38250
Max. torque Nm 169
Chuck capacity mm 1.5–13
Maximum drilling capacity
WOOD
Auger mm 38
Paddle mm 38
Twist mm 25.4
Self‑feed mm 66
Hole saw mm 127
SHEET METAL
Twist mm 12.7
Hole saw mm 101
Step bit mm #9 (28.5)
PLATE STEEL
Carbide tipped hole cutter mm 25.4
MASONRY
Carbide percussion bit mm 12.7
Weight (without battery pack) kg 1.87
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑1:
L
PA
(emission sound pressure level) dB(A) 96
L
WA
(sound power level) dB(A) 104
K (uncertainty for the given
sound level)
dB(A) 3
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
English (original instructions)
DRILL/DRIVER/IMPACT DRILL
DCD1007

DeWalt DCD1007 Specifications

General

Brand	DeWalt
Model	DCD1007
Category	Impact Driver
Language	English