To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DCF815 and is the answer not in the manual?
General| Voltage | 12V |
|---|---|
| Drive Size | 1/4 inch |
| Tool Weight | 2.2 lbs |
| LED Light | Yes |
| Chuck Type | Quick Release |
| No Load Speed | 0-2450 RPM |
| Impacts per Minute | 0-3400 IPM |
| Tool Length | 6.25 in |
| Battery Type | Lithium-Ion |
Read all safety warnings and instructions to avoid electric shock, fire, and serious injury.
Maintain a clean, well-lit area and keep children and bystanders away.
Ensure proper plugs, avoid wet conditions, and protect cords to prevent shock.
Stay alert, use PPE, prevent unintentional starting, and maintain balance.
Use correct tools, maintain them, and store safely to prevent accidents.
Recharge only with specified chargers and use only designated battery packs.
Prevent short circuits, avoid contact with ejected liquid, and use caution.
Have tools serviced by qualified personnel using identical replacement parts.
Includes rules for wiring, workpiece support, eye protection, and dust exposure.
Avoid explosive atmospheres, tampering, high temperatures, and fire hazards.
Information regarding the rechargeable battery recycling program.
Keep chargers dry and use only DEWALT specified chargers and batteries.
Charge only DEWALT batteries, keep chargers clean, and use correct extension cords.
Disconnect before cleaning, do not connect chargers together, and use standard voltage.
Steps for charging, indicators for charging status, and hot/cold pack delay.
The charger and battery pack can remain connected after charging.
Information on weak and faulty battery packs.
Instructions for securely mounting the charger on a wall.
Optimal charging temperatures, troubleshooting, and keeping cavities clean.
Store battery packs in a cool, dry place and recharge before storage.
Identification of key parts of the tool.
Designed for professional impact screwdriving in various materials.
Safety guidelines for attaching and using the optional belt hook.
Step-by-step guide for battery pack insertion and removal.
Controls tool speed and includes a brake; avoid continuous variable speed use.
Determines rotation direction and acts as a lock-off button.
Worklights illuminate the work surface when the trigger is squeezed.
Accepts 1/4" hex accessories and 1" bit tips; instructions for accessory installation.
Use only impact sockets; instructions for socket installation and removal.
Provides output torque values in Ft.-Lbs., In.-Lbs., and Nm for models.
Ensure systems withstand torque; keep tool pointed straight at fasteners.
Lock off tool and disconnect battery before adjustments; blow out air vents.
Use mild soap and water for tools; disconnect charger before cleaning.
Use only DEWALT recommended accessories and impact sockets.
Chargers/batteries are not serviceable; use authorized centers for repairs.
Registering offers benefits like efficient warranty service and proof of purchase.
Product registration aids efficient service, confirms ownership, and allows safety notifications.
Covers defects in materials/workmanship for three years; excludes normal wear and abuse.
Tampering voids warranty; offers 90-day money-back guarantee.
Warranty terms vary for products sold in Latin America.
Replace illegible or missing warning labels by calling DEWALT.
