Need help?Do you have a question about the DeWalt DCF809 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| No Load Speed | 0-2800 RPM |
| Impacts Per Minute | 0-3200 IPM |
| Drive Size | 1/4 inch |
| Anvil Type | Quick Release |
| Battery Type | Lithium-Ion |
| Weight | 2.2 lbs |
| Max Torque (Nm) | 190 Nm |
Provides specifications like impact rate, torque, weight, noise, and vibration.
Explains hazard signal words (DANGER, WARNING, CAUTION, NOTICE) and symbols.
Guidelines for maintaining a safe and clean work environment to prevent accidents.
Precautions regarding power tool plugs, earthed surfaces, rain, and cord handling.
Advice on staying alert, using PPE, preventing unintentional starts, and proper attire.
Instructions on proper tool usage, maintenance, and storage to ensure safety and longevity.
Guidelines for safe charging, usage, and handling of battery packs to prevent hazards.
Specific safety measures for impact drivers, including handling live wires and belt hook usage.
Instructions for safely fitting a new mains plug, including fuse recommendations.
Recommendations and cautions regarding the use of extension cords.
Identifies residual risks that cannot be avoided despite safety measures.
Safety guidelines for chargers, including voltage compatibility and double insulation.
Essential safety instructions and precautions for operating battery chargers.
Step-by-step instructions for inserting and charging a battery pack using the charger.
Details on charger indicators, hot/cold pack delay, and electronic protection systems.
Guidelines for safely cleaning the charger exterior without liquid ingress.
Comprehensive safety precautions for handling, charging, and storing battery packs.
Warnings and regulations concerning the safe transport of batteries, especially lithium-ion.
Information on FLEXVOLT™ battery modes (Use/Transport) and shipping considerations.
Best practices for storing battery packs to maintain performance and life.
Explains pictographs found on chargers and battery packs.
Lists compatible battery pack models for the DCF809 tool.
Lists the items included in the product package.
Indicates where the date code and manufacturing year are located on the tool.
Identifies the main parts of the impact driver tool.
Instructions for installing and removing the battery pack from the tool handle.
Explains the function and interpretation of the battery pack's fuel gauge indicator.
Instructions for attaching and using the belt hook and magnetic bit holder accessories.
Demonstrates the correct way to hold the tool for safe operation and control.
Explains how to control the tool's speed using the variable speed trigger.
Describes how to change the tool's rotation direction and use the lock-off function.
Information about the integrated worklights and their activation.
Instructions for installing and removing accessories using the quick-release chuck.
Guidelines for cleaning the tool's exterior using dry air and approved methods.
Information and warnings about using recommended accessories with the tool.
Instructions for proper disposal and recycling of electrical products and batteries.
Guidance on when to recharge and how to dispose of battery packs at the end of their life.
To Next Page
