Need help?Do you have a question about the DeWalt DCF809D1 and is the answer not in the manual?
General| Brand | DeWalt |
|---|---|
| Model | DCF809D1 |
| Category | Impact Driver |
| Language | English |
DEWALT declares product compliance with EU directives and standards.
DEWALT declares product compliance with UK regulations and standards.
Key precautions for personal safety, including alertness, PPE, and proper handling.
Guidelines for correct power tool and battery pack usage, care, and maintenance.
Specific safety rules for impact drivers and awareness of residual risks.
Instructions for attaching, using, and removing belt hook and magnetic bit holder.
Observe safety instructions and regulations, disconnect power before adjustments.
Maintain proper hand position for safe control and anticipate sudden reactions during operation.
Use variable speed for starting; tool has a brake and stops when trigger is released.
Select rotation direction and lock tool using the control button; centre position locks it off.
Worklights activate with trigger, stay on for 20s after release; intended for immediate work surface.
Use only impact accessories; push accessory into chuck to install, pull collar to remove.
Impact tool generates maximum torque; ensure system can withstand it to prevent breakage.
Torque affected by voltage, accessory size, bolt size, bolt condition, material, and fastening time.
Tool designed for long operation with minimum maintenance; ensure proper tool care and cleaning.
Blow out dust with dry air; avoid solvents and harsh chemicals; use damp cloth with mild soap.
The power tool requires no additional lubrication.
Use only DEWALT recommended accessories to reduce injury risk; impact accessories are mandatory.
Separate collection and recycling of products and batteries according to local provisions.
Recharge battery when power is low; recycle Li-Ion cells at dealer or recycling station.
To Next Page
