DeWalt DCF809 - General Power Tool Safety Warnings; Work Area Safety; Electrical Safety

English
5
Batteries
Chargers/Charge Times
(Minutes)
Cat #
V
DC
Ah
Weight
(kg)
DCB104
DCB107
DCB112 DCB113 DCB115 DCB1
18
DCB132
DCB119
DCB546
18/54
6.0/2.0
1.05
60
270
170
140
90
60
90
X
DCB547
18/54
9.0/3.0
1.46
75*
420
270
220
135*
75*
135*
X
DCB548
1.44
120
540
350
300
180
120
180
X
DCB181
0.35
22
70
45
35
22
22
45
DCB182
18
4.0
0.61
60/40**
185
120
100
60
60
120
DCB183/B
18
2.0
0.40
30
90
60
50
30
30
60
DCB184/B
18
5.0
0.62
75/50**
240
150
120
75
75
150
DCB185
18
1.3
0.35
22
60
40
30
22
22
22
X
DCB187
18
3.0
0.54
45
140
90
70
45
45
45
90
DCB189
18
4.0
0.54
60
185
120
100
60
60
60
120
*Date code 201811475B or later
**Date code 201536 or later
GENERAL POWER TOOL SAFETY WARNINGSe ) When operating a power tool
outdoors, use an
suitable for outdoor use reduces the risk of electric shock. extension cord suitable for outdoor use. Use of
a cord
WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power
tool. Failure to follow all instructions listed below f ) If operating a power tool in a damp location
is
may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
FOR FUTURE REFERENCE. 3) Personal Safety
The term “power tool” in the warnings refers to your
mainsoperated (corded) power tool or battery-operated
(cordless) power tool.
1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or
dark
areas invite accidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c ) Keep children and bystanders away while
operating
a power tool. Distractions can cause you to lose
control.
2) Electrical Safety a ) Power tool plugs must
match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b ) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or
grounded.
c ) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d ) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or