SAFETY: before to attempt the repair, the following should be observed
11
• Ensure that the correct tool is used and only use good quality hand tools.
• Ensure the work shop is clean and tidy.
• Always wear protective clothing, Overalls, safety gloves, safety glasses,
safety hat/net etc.
• Use Anti-Static control where necessary.
• Check condition of cord and plug on the charger if present.
• Before turning product on for analysis carry out a visual check for
loose/broken parts Including accessories, etc.
• Before repair ensure battery is removed.
• Never repair a product whilst it is into a power supply, or a battery is
connected.
• Remove accessories, drill bits, chisels, cutters etc.
• Ensure side handles function correctly.
To Next Page
Loading...
