Need help?Do you have a question about the DeWalt DCD785 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Chuck Size | 1/2 inch |
| Speed Settings | 2 |
| No Load Speed | 0-600 / 0-2000 RPM |
| Battery Type | Lithium-Ion |
| Power Source | Cordless |
| Clutch Settings | 14 |
| Hammering Mode | Yes |
| Chuck Type | Keyless |
| Beats per Minute | 0-10, 200 / 0-34, 000 BPM |
Details drilling capacity for Wood, Metal, and Masonry.
Vibration data determined according to EN 60745 standards.
Explains signal words like DANGER, WARNING, CAUTION, NOTICE.
Covers safe operation environment, electrical precautions, and operator well-being.
Proper handling, adjustments, and maintenance of the tool.
Safety for electrical connections and steps to install/remove battery packs.
Explanation of trigger switch, forward/reverse button, and fuel gauge.
Adjusting torque, shifting gears, and operating the keyless chuck.
Step-by-step guide for performing drilling and hammerdrilling tasks.
Instructions for using the tool in screwdriver mode.
Guidelines for cleaning the tool/charger, lubrication, and accessory use.
Details on product warranty, service contract, and satisfaction guarantee.
Details on battery pack types, voltage, capacity, and compatible chargers.
Information on fuse ratings and definitions of safety terms.
Safety measures for environment, electrical connections, and operator.
Best practices for using, caring for, and servicing impact tools.
Safety for electrical connections, extension cords, and battery handling.
Basic operation, correct grip, and explanation of tool controls.
Information on torque output, usage, and fitting accessories.
Guidelines for cleaning, lubrication, and accessory use for impact tools.
Instructions for battery pack disposal and recycling.
To Next Page
