Need help?Do you have a question about the DeWalt DCD701 and is the answer not in the manual?
General| Voltage | 12V |
|---|---|
| Max RPM | 1500 RPM |
| Chuck Size | 3/8 in |
| Battery Type | Lithium-Ion |
| Tool Length | 5.97 in |
| No Load Speed (RPM) | 0-425 / 0-1500 RPM |
Presents measured vibration and noise emission levels according to standards.
Confirms product compliance with relevant EU directives and standards.
Summarizes key technical specifications like voltage, speed, torque, and weight.
Explains the meaning of DANGER and WARNING signal words for hazard communication.
Covers safe practices for the work environment and electrical connections.
Emphasizes operator alertness, PPE, and proper handling to prevent injury.
Guidelines for proper power tool operation, maintenance, and care.
Critical safety information for handling and charging battery packs and chargers.
Identifies residual risks and provides safety instructions for DeWALT chargers.
Instructions for replacing the mains plug in the UK and Ireland.
Guidance on using extension cables and important safety for battery chargers.
Step-by-step instructions for charging a battery pack safely and correctly.
Explains charger indicators and operation modes like Hot/Cold Pack Delay.
Essential safety instructions for handling, charging, and storing battery packs.
Precautions for handling damaged batteries, disposal, and environmental protection.
Information on shipping regulations for lithium-ion batteries.
Best practices for storing battery packs for optimal performance and life.
Explains important labels and pictographs found on chargers and battery packs.
Information on date code location and identification of key tool parts.
Instructions for assembling the tool and installing/removing the battery pack.
Instructions for attaching the belt hook and installing bits or accessories.
How to select operating speed and mode (Drilling, Screwdriving, Hammerdrilling).
Explanation of the variable speed trigger and forward/reverse control button.
Detailed steps and recommendations for effective screwdriving.
Instructions and recommendations for drilling and hammerdrilling operations.
Guidance on tool maintenance, cleaning, and lubrication requirements.
Information on proper disposal of products and batteries for environmental protection.
Recommendations for recharging batteries for optimal performance and lifespan.
Advice on using recommended accessories for safe and effective operation.
To Next Page
