DeWalt XTREME DCD701 - User Manual

DCD701
DCD706
Final page size: A5 (148mm x 210mm)

Summary

General Power Tool Safety Warnings

Work Area Safety

General safety advice for the work environment.

Electrical Safety

Precautions to prevent electric shock.

Personal Safety

Guidelines for user safety while operating the tool.

Power Tool Use and Care

Instructions for proper tool operation and maintenance.

Safety Instructions for All Operations

Safety Instructions When Using Long Drill Bits

Additional Safety Warnings for Drills

Chargers

Important Safety Instructions for All Battery Chargers

Charging a Battery (Fig. B)

Step-by-step guide for charging the battery pack.

Charger Operation

Battery Packs

Important Safety Instructions for All Battery Packs

Critical safety guidelines for all battery packs.

Transportation

Assembly and Adjustments

Inserting and Removing the Battery Pack from the Tool (Fig. B)

Instructions for battery installation and removal.

Fuel Gauge Battery Packs (Fig. B)

Operation

Instructions for Use

General instructions for operating the tool.

Proper Hand Position (Fig. E)

Installing a Bit or Accessory into a Keyless Chuck (Fig. D)

Speed Selection (Fig. A)

Mode Selection (Fig. A)

Variable Speed Trigger and Forward;Reverse Control Button (Fig. A)

Screwdriving

Drilling

Hammerdrilling (DCD706 Only)

Maintenance

Performing an Application (Fig. A)

DeWalt XTREME DCD701 Specifications

General

Voltage	12V
Max Torque	250 UWO
Battery Type	Lithium-Ion
Max RPM	1500 RPM
Chuck Size	3/8 inch
Tool Length	5.97 inches
No Load Speed	0-1500 RPM