Need help?Do you have a question about the DeWalt XR Li-Ion DCD991 and is the answer not in the manual?
General| Voltage | 18 V |
|---|---|
| Battery Type | XR Li-Ion |
| Chuck Size | 1/2 inch |
| Speed Settings | 3 |
| LED Light | Yes |
| Chuck Capacity | 1/2 inch |
| Power Output | 820 UWO |
| Battery Chemistry | Lithium-Ion |
| Max Torque (UWO) | 820 UWO |
| Max RPM | 2000 RPM |
| No Load Speed (RPM) | 0-450 / 0-1300 / 0-2000 RPM |
| Length | 213 mm |
Summary of voltage specifications for DCD991 and DCD996.
Information on compatible battery types.
Mandatory instruction to read all safety advice and guidelines.
Indicates an imminently hazardous situation resulting in death or serious injury.
Indicates a potentially hazardous situation resulting in death or serious injury.
Special safety requirement for 120V models.
Procedure for safely replacing a damaged power cord.
Emphasizes attentiveness and rational decision-making during operation.
Mandates the use of safety gear like eye protection.
Use manufacturer-specified chargers to avoid risks.
Use only compatible battery packs to prevent injury and fire.
Protect hearing from noise exposure during impact drilling.
Prevent electric shock by gripping insulated areas.
Protect hearing from prolonged exposure to high noise levels.
Protect eyes from flying chips and particles.
Potential for hearing damage due to noise levels.
Potential for injury from ejected particles.
General instruction to retain safety and operating instructions.
Warning against liquid ingress into the charger.
Safety recommendation for using an RCD with a 30mA rating.
Warning against charging non-DEWALT batteries.
Tool's system protects battery from overload, overheating, and deep discharge.
Safety measure to disconnect the charger from the outlet.
General directive to review all safety and operating instructions.
Prohibits charging or using batteries in hazardous environments.
Ensures compatibility and safety by using designated chargers.
Protects battery packs from liquid damage.
Strong warning against tampering with the battery pack.
Warning against burning batteries due to explosion risk.
Procedure for skin contact with battery contents.
Hazard of battery liquid igniting from sparks or flame.
Caution regarding fire risk from exposed battery terminals.
Safety instruction regarding damaged power cords.
Emphasizes using correct chargers for DEWALT batteries.
Strong warning against altering the power tool or its parts.
Tool designed for professional applications like drilling and screwdriving.
Do not use in wet conditions or near flammable substances.
Warning to keep children away from the tool.
Turn off tool and disconnect battery before making adjustments.
Warning to only use DEWALT branded battery packs and chargers.
Mandatory safety requirement for installing the side handle.
Safety warning against using tool power to tighten chuck.
Pre-operation check to ensure accessory is securely held.
Caution against staring directly into the spotlight beam.
Recommendation for preparedness when battery is low.
Disconnect battery before attaching or removing accessories.
Only hang the tool's belt hook from a work belt.
Adherence to safety guidelines and applicable rules.
Disconnect battery before making any adjustments or changes.
Emphasizes the importance of using the correct grip.
Hold tool securely to anticipate sudden movements.
Disconnect power before making adjustments or changing accessories.
Ensures workpiece stability for safe drilling.
Immediate action: release trigger, remove bit, determine cause.
Disconnect power before performing any maintenance.
Use compressed air to remove dust from vents.
Mandates eye protection and dust mask when cleaning.
Prohibits the use of harsh cleaning agents on tool parts.
Approved method for cleaning the tool's exterior.
Safety imperative to use only tested DEWALT accessories.
To Next Page