DeWalt XR Li-Ion DCD991 User Manual

6
English
– Impairment of hearing.
– Risk of squeezing fingers when changing
accessories.
– Health hazards caused by breathing dust
developed when working in wood.
– Risk of personal injury due to flying particles.
– Risk of personal injury due to prolonged use.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
DATE CODE POSITION
The Date Code, which also includes the year of
manufacture, is printed into the housing surface that
forms the mounting joint between tool and battery.
Example:
2016 XX XX
Year of Manufacture
Important Safety Instructions for All
Battery Chargers
SAVE THESE INSTRUCTIONS: This manual
contains important safety and operating
instructions for compatible battery chargers (refer to
TechnicalData).
 • Beforeusingcharger,readallinstructionsand
cautionary markings on charger, battery pack,
and product using battery pack.
WARNING: Shock hazard. Do not allow
any liquid to get inside charger. Electric
shock may result.
WARNING: We recommend the use of
a residual current device with a residual
current rating of 30mA or less.
CAUTION: Burnhazard.Toreduce
the risk of injury, charge only
DeWALT
rechargeable batteries. Other types of
batteries may burst causing personal
injury and damage.
CAUTION: Children should be
supervised to ensure that they do not
play with the appliance.
NOTICE: Under certain conditions, with
the charger plugged into the power
supply, the exposed charging contacts
inside the charger can be shorted by
foreign material. Foreign materials of
a conductive nature such as, but not
limited to, steel wool, aluminum foil or
d) Under abusive conditions, liquid may be
ejected from the battery, avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6) SERVICE
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Additional Specific Safety Rules for
Drills/Drivers/Hammerdrills
 • Wearearprotectorswhenimpactdrilling.
Exposure to noise can cause hearing loss.
 • Useauxiliaryhandles,ifsuppliedwiththe
tool. Loss of control can cause personal injury.
 • Holdpowertoolbyinsulatedgripping
surfaces when performing an operation
where the cutting tool or the fastener may
contact hidden wiring. Cutting accessory or
fasteners contacting a “live” wire may make
exposed metal parts of the power tool “live” and
could give the operator an electric shock.
 • Useclampsorotherpracticalwaytosecure
and support the workpiece to a stable
platform. Holding the work by hand or against
your body is unstable and may lead to loss of
control.
 • Wearearprotectorswhenhammering
for extended periods of time. Prolonged
exposure to high intensity noise can cause
hearing loss. Temporary hearing loss or serious
ear drum damage may result from high sound
levels generated by hammerdrilling.
 • Wearsafetygogglesorothereyeprotection.
Hammering and drilling operations cause chips
to fly. Flying particles can cause permanent eye
damage.
 • Hammerbitsandtoolsgethotduring
operation. Wear gloves when touching them.
Residual Risks
The following risks are inherent to the use of
percussion drills:
– Injuries caused by touching the rotating parts or
hot parts of the tool.
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:

DeWalt XR Li-Ion DCD991 Specifications

General

Voltage	18 V
Battery Type	XR Li-Ion
Chuck Size	1/2 inch
Speed Settings	3
LED Light	Yes
Chuck Capacity	1/2 inch
Power Output	820 UWO
Battery Chemistry	Lithium-Ion
Max Torque (UWO)	820 UWO
Max RPM	2000 RPM
No Load Speed (RPM)	0-450 / 0-1300 / 0-2000 RPM
Length	213 mm