2. For long storage, it is recommended to store a fully
charged battery pack in a cool, dry place out of the
charger for optimal results.
nOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be
recharged before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the
labels on the charger and the battery pack may show the
following pictographs:
Read instruction manual before use.
See Technical Data for charging time.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge DeWALT battery packs only with
designated DeWALT chargers. Charging
battery packs other than the designated DeWALT
batteries with a DeWALT charger may make them burst
or lead to other dangerous situations.
Do not incinerate the battery pack.
Battery Type
The DCD701, DCD706 operate on a 12 volt battery pack.
These battery packs may be used: DCB122, DCB124,
DCB125, DCB127. Refer to Technical Data for more
information.
Package Contents
The package
contains: 1
Drill/drive
r (DCD701)
or
1 Hammerdrill (DCD706)
1 Charger
1 Belt hook (included with some models)
1 Li-Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1, Y1
models)
2 Li-Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2, Y2
models)
3 Li-Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3, Y3
models)
1 Instruction manual
nOTE: Battery packs, chargers and kitboxes are not
included with N models. Battery packs and chargers are
not included with NT models. B models include
Bluetooth® battery packs. nOTE: The Bluetooth® word
mark and logos are registered trademarks owned by the
Bluetooth®, SIG, Inc. and any use of such marks by
DeWALT is under license. Other trademarks and trade
names are those of their respective owners.
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand this
manual prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Visible radiation. Do not stare into light.
To Next Page
Loading...
