DeWalt DCD701 User Manual

English
3
DeWALT one of the most reliable partners for
professional power tool users.
Technical Data
DCD701
DCD706
Voltage
V
DC
12
12
Type
1
1
Battery type
Li-Ion
Li-Ion
Power output
W
250
250
No-load
speed
1
st gear
min
-1
0–425
0–425
2nd gear
min
-1
0–1500
0–1500
Beats per minute
1st gear
-
0–7225
2nd gear
Max. Torque (hard/soft)
Nm
Chuck capacity
mm
10
10
Maximum drilling capacity
Wood
Metal
Masonary
mm
mm
mm
20
10
-
20
10
10
Weight (without battery
pack)
kg
0.87
0.96
Noise values and/or vibration values (triax vector sum)
according to EN60745-2-1:
L
PA
(emission sound
pressure level)
dB(A)
72
83
L
WA
(sound power level)
dB(A)
83
94
K ( uncertainty for the
given sound level)
dB(A)
3
3
Drilling into metal
Vibration emission value
a
h,D
=
m/s
2
2.5
3.1
Uncertainty K =
m/s
2
1.5
1.5
Drilling into concrete
Vibration emission value
a
h,ID
=
m/s
2
-
15.5
Uncertainty K =
m/s
2
-
4
Screwdriving
Vibration emission value
a
h
=
m/s
2
< 2.5
<2.5
Uncertainty K =
m/s
2
1.5
1.5
The vibration and/or noise emission level given in this
information sheet has been measured in accordance
with a standardised test given in EN60745 and may be
used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise
emission level represents the main applications
of the tool. However if the tool is used for
different applications, with different accessories or
poorly maintained, the vibration and/or noise emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration
and/ or noise should also take into account the
times when the tool is switched off or when it is
running but not actually doing the job. This may
significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or
noise such as: maintain the tool and the
accessories, keep the hands warm (relevant for
vibration), organisation of work patterns.
EC-Declaration of Conformity
Machinery Directive
Sub-Compact Drill/Driver/Hammerdrill DCD701,
DCD706
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-
1:2010. These products also comply with Directive
2014/30/EU and 2011/65/EU. For more information,
please contact DeWALT at the following address or refer
to the back of the manual.

DeWalt DCD701 Specifications

General

Voltage	12V
Max RPM	1500 RPM
Chuck Size	3/8 in
Battery Type	Lithium-Ion
Tool Length	5.97 in
No Load Speed (RPM)	0-425 / 0-1500 RPM