DeWalt DCD730 - Technical Data

26
ENGLISH
English (original instructions)
CORDLESS COMPACT 13 mm DRILL/DRIVER
DCD730, DCD780
CORDLESS COMPACT 13 mm DRILL/DRIVER/HAMMERDRILL
DCD735, DCD785
Congratulations!
You have chosen a
DeWALT
tool. Years of experience, thorough product development and innovation make
DeWALT
one of the
most reliable partners for professional power toolusers.
Technical Data
DCD730 DCD735 DCD780 DCD785
Voltage V
DC
14.4 14.4 18 18
Type 1/10 1/10 1/10 1/10
Battery type Li-Ion Li-Ion Li-Ion Li-Ion
Power output W 300 300 350 350
No-load speed
1st gear min
-1
0–550 0–550 0–600 0–600
2nd gear min
-1
0–1900 0–1900 0–2000 0–2000
Impact rate
1st gear min
-1
– 0–9350 – 0–10200
2nd gear min
-1
– 0–32300 – 0–34000
Max. torque (hard/soft) Nm 57/20 57/20 60/23 60/23
Chuck capacity mm 13 13 13 13
Maximum drilling capacity
Wood mm 35 35 38 38
Metal mm 13 13 13 13
Masonry mm – 13 – 13
Weight (without battery pack) kg 1.2 1.24 1.2 1.24
Noise values and vibration values (triax vector sum) according to EN60745-2-1:
L
PA
(emission sound pressure level) dB(A) 74 89 74 89
L
WA
(sound power level) dB(A) 85 100 85 100
K (uncertainty for the given sound level) dB(A) 3 3 3 3
Drilling into metal
Vibration emission value a
h,D
= m/s
2
3.0 3.5 3.0 3.5
Uncertainty K = m/s
2
1.5 1.5 1.5 1.5
Drilling into concrete
Vibration emission value a
h,ID
= m/s
2
– 15.0 – 15.0
Uncertainty K = m/s
2
– 3.3 – 3.3
Screwdriving
Vibration emission value a
h,ID
= m/s
2
< 2.5 2.5 < 2.5 2.5
Uncertainty K = m/s
2
1.5 1.5 1.5 1.5
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It may be used for a preliminary assessment ofexposure.