DeWalt DCD796D2 - Technical Specifications; Model Data (DCD791 & DCD796)

3
MAXIMUM RECOMMENDED CAPACITIES
DCD791 DCD796
Wood
Auger 7/8" (22 mm) 7/8" (22 mm)
Paddle 1-1/4" (32 mm) 1-1/4" (32 mm)
Twist 1/2" (13 mm) 1/2" (13 mm)
Self-feed 1-3/8" (35 mm) 1-3/8" (35 mm)
Hole saw 2" (50 mm) 2" (50 mm)
Metal
Twist 1/2" (13 mm) 1/2" (13 mm)
Hole saw 1-3/8" (35 mm) 1-3/8" (35 mm)
Masonry
Carbide – 1/4" (6.5 mm)
CAPACITÉS MAXIMALES RECOMMANDÉES
DCD791 DCD796
Madeira
Broca em espiral 22 mm (7/8") 22 mm (7/8”)
Broca chata 32 mm (1-1/4") 32 mm (1-1/4')
Broca giratória 13 mm (1/2") 13 mm (1/2")
Auto-alimentação 35 mm (1-3/8") 35 mm (1-3/8")
Serra-copo 50 mm (2") 50 mm (2")
Metal
Broca giratória 13 mm (1/2") 13 mm (1/2")
Serra-copo 35 mm (1-3/8") 35 mm (1-3/8")
Alvenaria
Carboneto – 6,5 mm (1/4”)
CAPACIDADES MÁXIMAS RECOMENDADAS
DCD791 DCD796
Madera
Barrena 22 mm (7/8") 22 mm (7/8")
Paleta 32 mm (1-1/4") 32 mm (1-1/4")
Giro 13 mm (1/2") 13 mm (1/2")
Alimentación
automática
35 mm (1-3/8") 35 mm (1-3/8")
Sierra caladora 50 mm (2") 50 mm (2")
Metal
Giro 13 mm (1/2") 13 mm (1/2")
Sierra caladora 35 mm (1-3/8") 35 mm (1-3/8")
Mampostería
Carburo – 6,5 mm (1/4")