Need help?Do you have a question about the DeWalt DCD796P2 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Battery Type | Li-Ion |
| Max Torque | 70 Nm |
| Chuck Capacity | 1.5-13 mm |
| Hammer Action | Yes |
| Power Output | 460 W |
| Max Torque (Soft) | 27 Nm |
| Max. Drilling Capacity (Wood) | 40 mm |
| Max. Drilling Capacity (Metal) | 13 mm |
| Max. Drilling Capacity (Masonry) | 13 mm |
| Battery Capacity | 5.0 Ah |
| Tool-Free Chuck | Yes |
| LED Light | Yes |
| No Load Speed | 0-2000 RPM |
| Beats per Minute (BPM) | 0-9350/34000 bpm |
Lists the specific DEWALT tool models covered by this manual.
Detailed technical data for DCD791 and DCD796 models.
Covers fundamental safety rules, definitions, and warnings.
Specialized safety advice for tool operation and battery use.
Crucial safety guidelines for battery packs and chargers.
Step-by-step guide for charging battery packs and understanding indicators.
Details on charger functions like hot/cold pack delay and protection systems.
Instructions for battery pack installation, removal, and safe transport.
How to insert and remove the battery pack from the tool.
How to check the remaining charge level of the battery pack.
Operation of trigger, forward/reverse, torque, and gear selection.
Instructions for using the keyless chuck and other accessories.
Correct hand positioning and general operating instructions.
How to perform drilling, hammerdrilling, and screwdriving operations.
Instructions for tool cleaning, lubrication, and charger care.
Guidelines for product disposal and recycling of battery packs.
To Next Page
