DeWalt DCD996P2 Service Training

H
H
Sku DCD996P2 DCD991P2
Description 18V XR BL Hammer Drill Driver 18V XR BL Drill Driver
Chuck Capacity (mm)
1.5-13 1.5-13
Chuck Carbide
Yes Yes
Battery (Voltage)
18 18
Power Output (Ah)
5.0Ah 5.0Ah
Power Output (Unit Watts Hour)
820 820
Load Speed (RPM)
0-450 / 1300 / 2000 (HD -0-500/1500/2250) 0-450 / 1300 / 2000
Beats per Minute
0-8600 / 25500 / 38250 -
Max Torque (Nm) Hard / Soft
95/66 95/66
Max Drilling Capacity (Wood) (mm)
55 55
Max Drilling Capacity (Metal) (mm)
15 15
Max Drilling Capacity (Masonry) (mm)
13 -
Marketing Weight (kg)
- bare 1.6 1.5
Marketing Weight (kg)
- with pack 2.1 2.0
Marketing Height (mm)
- without pack 208 208
Marketing Length (mm)
213 201
Width (mm)
70 70
LED (Foot/Chin)
Foot
- Switched LED (Low/Med/High -
20 min)
Foot
- Switched LED (Low/Med/High -
20 min)
LED Light Lumens Output
3 / 18 / 77 3 / 18 / 77
IP Rating
IP54 (TBC) IP54 (TBC)
Charge Type
DCB115 DCB115
Sound Pressure dB(A)
97 75
Sound Pressure uncertainty dB(A)
3 3
Sound Power dB(A)
108 86
Sound Power uncertainty dB(A)
3 3
Vibration emmision value
- Drilling into metal (m/s2) <2.5 <2.5
Uncertainty K1 (m/s2) 1.5 1.5
Vibration emmision value
-
Drilling into concrete (m/s2)
- 15
Uncertainty K2 (m/s2) - 3.9
Vibration emmision value
- Screwdriving (m/s2) <2.5 <2.5
Uncertainty K3 (m/s2) 1.5 1.5
Chuck Type
Jacobs 4713 Jacobs 4713

DeWalt DCD996P2 Specifications

General

Voltage	20V
Battery Type	Lithium-Ion
Battery Capacity	5.0Ah
Max RPM	2, 250 RPM
Max BPM	38, 250 BPM
Chuck Size	1/2 inch
Speed Settings	3
LED Light	Yes
Max Torque	820 UWO (Unit Watts Out)
Length	213 mm