EasyManua.ls Logo

DeWalt DCD996P2 User Manual

DeWalt DCD996P2
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DCD991
DCD996
Final page size: A5 (148mm x 210mm)
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per DeWalt DCD996
DCD996NT o cerca il tuo prodotto tra le migliori offerte di Elettroutensili
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per DeWalt DCD996
DCD996N o cerca il tuo prodotto tra le migliori offerte di Elettroutensili

Other manuals for DeWalt DCD996P2

Question and Answer IconNeed help?

Do you have a question about the DeWalt DCD996P2 and is the answer not in the manual?

DeWalt DCD996P2 Specifications

General IconGeneral
Voltage20V
Battery TypeLithium-Ion
Battery Capacity5.0Ah
Max RPM2, 250 RPM
Max BPM38, 250 BPM
Chuck Size1/2 inch
Speed Settings3
LED LightYes
Max Torque820 UWO (Unit Watts Out)
Length213 mm

Summary

Brushless Cordless 13 mm Drill/Driver, DCD991

Technical Data

Presents specifications for noise, vibration, voltage, battery type, power, speed, torque, and capacity.

Safety and Compliance Information

EC-Declaration of Conformity

States compliance with relevant EU Machinery and EMC Directives.

General Power Tool Safety Warnings

Provides critical safety instructions for operating power tools, including work area and electrical safety.

Safety Guideline Definitions

Explains the meaning of hazard signal words: Danger, Warning, and Caution.

Charger and Battery Pack Usage

Charger Safety and Operation

Covers important safety instructions, charging procedures, indicators, and electronic protection systems.

Battery Pack Safety and Handling

Essential safety guidelines for handling, charging, and storing DEWALT battery packs.

Tool Assembly and Operation

Inserting and Removing the Battery Pack

Instructions for installing and detaching the battery pack from the tool handle.

Variable Speed Switch and Side Handle

Details on using the variable speed trigger and the importance of the side handle.

Torque Adjustment and Gear Selection

Guidance on setting torque for fasteners and selecting the correct gear speed.

Drill, Screwdriver, and Hammerdrill Operation

Specific procedures and safety advice for different drilling and driving modes.

Maintenance and Environmental Care

Tool Cleaning Procedures

Safe methods for cleaning the tool's exterior and air vents.

Protecting the Environment

Guidelines for proper disposal of products and batteries.

Related product manuals