DeWalt DCD996B User Manual

If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DeWALT
Instruction Manual
Guide D’utilisation
Manual de instrucciones
DCD991
20V Max* Heavy-Duty 1/2" (13 mm) Brushless Cordless
Drill/Driver
Perceuse/visseuse industrielle, sans fil et sans balai, 20V Max*
13mm (1/2po)
Taladro/destornillador inalámbrico sin escobillas de 20 V Máx*
para trabajos pesados de 13 mm (1/2")
DCD996
20V Max* Heavy-Duty 1/2" (13 mm) Brushless Cordless Drill/
Driver/Hammerdrill
Perceuse/visseuse/perceuse à percussion industrielle, sans fil
et sans balai, 20V Max* 13mm (1/2po)
Taladro/destornillador/taladro percutor inalámbrico sin
escobillas de 20 V Máx* para trabajos pesados de 13 mm (1/2")
final page size: 8.5 x 5.5 in

DeWalt DCD996B Specifications

General

Motor Type	Brushless
Max RPM	2, 250 RPM
Max BPM	38, 250 BPM
Voltage	20V
Chuck Size	1/2 inch
Speed Settings	3
LED Light	Yes
Max Power	820 UWO
Hammering Rate	0-8, 600 / 0-25, 500 / 0-38, 250 BPM
Tool Type	Hammer Drill
Model Number	DCD996B
Length	8.4 inches
Battery Type	Lithium-Ion

Summary

Definitions: Safety Alert Symbols and Words

GENERAL POWER TOOL SAFETY WARNINGS

Work Area Safety

Focuses on maintaining a clean, well-lit, and distraction-free work environment for safety.

Electrical Safety

Covers proper grounding, avoiding wet conditions, and cord care to prevent electric shock.

Personal Safety

Emphasizes staying alert, using PPE, preventing unintentional starts, and dressing appropriately.

Power Tool Use and Care

Guidelines for using and maintaining power tools to ensure safe operation and longevity.

BATTERIES AND CHARGERS

Important Safety Instructions for All Battery Packs

Crucial safety guidelines for handling, charging, and storing DEWALT battery packs.

Transportation

Safety precautions for transporting battery packs to prevent fire hazards.

Shipping the DEWALT FLEXVOLT Battery

Details on shipping modes and regulations for FLEXVOLT™ batteries.

Fuel Gauge Battery Packs

Explains the fuel gauge indicator on battery packs and its interpretation.

The RBRC Seal

Information about the RBRC seal and battery recycling programs.

Important Safety Instructions for All Battery Chargers

Hot/Cold Pack Delay

How the charger handles battery packs that are too hot or too cold.

Electronic Protection System

Describes the tool's system to protect the battery from overload and deep discharge.

Wall Mounting

Instructions for securely mounting DEWALT chargers on a wall.

Charger Cleaning Instructions

Safety precautions and methods for cleaning the battery charger.

Important Charging Notes

Key considerations for optimal battery charging and troubleshooting.

Storage Recommendations

Advice on the best practices for storing battery packs for longevity.

COMPONENTS (FIG. A)

Intended Use

Features

Lanyard-Ready Attachment Kit

Details the features and installation of the lanyard-ready attachment kit.

Safety Warnings Specific for Use At Height

Critical safety precautions when working at height with tethered tools.

Installing the Battery Strap Carabiner to the Lanyard Attachment Point

Step-by-step guide for attaching the carabiner to the lanyard point.

Side Handle (Fig. A)

Forward/Reverse Control Button (Fig. A)

Explains the operation of the forward/reverse control button.

Torque Adjustment Collar/Electronic Clutch (Fig. G-I)

Details the torque adjustment collar and its electronic clutch function.

Variable Speed Trigger Switch (Fig. A)

How to use the variable speed trigger for controlled operation.

Three-Speed Gearing (Fig. G-I)

Worklight (Fig. J)

Describes the operation and modes of the integrated worklight.

Spotlight Mode

Details the spotlight feature, its modes, and operation.

Low Battery Warning

How the tool indicates a low battery condition, especially in spotlight mode.

Keyless Single Sleeve Chuck (Fig. K-M)

Instructions for inserting and securing drill bits using the keyless chuck.

Belt Hook (Optional Accessory) (Fig. A)

OPERATION

General operational guidelines for using the tool.

Installing and Removing the Battery Pack (Fig. N)

Step-by-step instructions for battery installation and removal.

Screwdriving (Fig. G)

Specific instructions and tips for using the tool for screwdriving tasks.

Drilling (Fig. H)

Hammerdrilling (Fig. I)

Guidance on using the hammer drilling function effectively and safely.

Proper Hand Position (Fig. O)

Correct hand placement for optimal control and safety during operation.

MAINTENANCE

Cleaning

How to clean the power tool safely and effectively.

Accessories

Repairs

Register Online

Three Year Limited Warranty