DeWalt DCD996P2 User Manual

ENGLISH
3
DCD991 DCD996
Noise values and vibration values (triax vector sum) according to EN60745:
L
PA
(emission sound pressure
level)
dB(A) 75 97
L
WA
(sound power level) dB(A) 86 108
K (uncertainty for the given
sound level)
dB(A) 3 3
Drilling into metal
Vibration emission value a
h,D
= m/s
2
<2.5 <2.5
Uncertainty K = m/s
2
1.5 1.5
Impact drilling
Vibration emission value a
h,ID
= m/s
2
– 15.0
Uncertainty K = m/s
2
– 3.9
Screwdriving
Vibration emission value a
h
= m/s
2
<2.5 <2.5
Uncertainty K = m/s
2
1.5 1.5
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of workpatterns.
Congratulations!
You have chosen a
DeWALT
tool. Years of experience, thorough
product development and innovation make
DeWALT
one of the
most reliable partners for professional power toolusers.
Technical Data
DCD991 DCD996
Voltage V
DC
18 18
Type 1/10 1/10
Battery type Li-Ion Li-Ion
Power output W 820 820
No load speed Drill, Driver/Hammer
1st gear min
-1
0–450 0–450/500
2nd gear 0–1300 0–1300/1500
3rd gear 0–2000 0–2000/2250
Impact rate
1st gear min
-1
– 0–8600
2nd gear – 0–25500
3rd gear – 0–38250
Max. torque (hard/soft)
hard Nm 95 95
soft Nm 66 66
Chuck capacity mm 1.5–13 1.5–13
Maximum drilling capcity
Wood mm 55 55
Metal 15 15
Masonry – 13
Weight (without battery pack) kg 1.5 1.6
English (original instructions)
BRUSHLESS CORDLESS 13 mm DRILL/DRIVER,
DCD991
BRUSHLESS CORDLESS 13 mm DRILL/DRIVER/
HAMMERDRILL, DCD996

DeWalt DCD996P2 Specifications

General

Voltage	20V
Battery Type	Lithium-Ion
Battery Capacity	5.0Ah
Max RPM	2, 250 RPM
Max BPM	38, 250 BPM
Chuck Size	1/2 inch
Speed Settings	3
LED Light	Yes
Max Torque	820 UWO (Unit Watts Out)
Length	213 mm