DeWalt DCE530 Instructions

25
ENGLISH
Batteries Chargers/Charge Times (Minutes)
Cat # V
DC
Ah Weight (kg)
DCB104 DCB107 DCB112 DCB113 DCB115 DCB118 DCB132 DCB119
DCB546 18/54 6.0/2.0 1.05 60 270 170 140 90 60 90 X
DCB547 18/54 9.0/3.0 1.46 75* 420 270 220 135* 75* 135* X
DCB548 18/54 12.0/4.0 1.44 120 540 350 300 180 120 180 X
DCB181 18 1.5 0.35 22 70 45 35 22 22 22 45
DCB182 18 4.0 0.61 60/40** 185 120 100 60 60/40** 60 120
DCB183/B 18 2.0 0.40 30 90 60 50 30 30 30 60
DCB184/B 18 5.0 0.62 75/50** 240 150 120 75 75/50** 75 150
DCB185 18 1.3 0.35 22 60 40 30 22 22 22 X
DCB187 18 3.0 0.54 45 140 90 70 45 45 45 90
DCB189 18 4.0 0.54 60 185 120 100 60 60 60 120
*Date code 201811475B or later
**Date code 201536 or later
Batteries
Chargers/Charge Times (Minutes)
Cat #
DC
Weight
*Date code 201811475B or later
**Date code 201536 or later
• Keep moveable items secured and steady whilescraping.
• Be sure to direct the hot air blast in a safe direction; away from
other people or flammableobjects.
• DO NOT remove the heat barrel cover duringuse.
• DO NOT touch the nozzle to any surface while running or
shortly afterrunning.
• Splinters and small particles of stripped paint can be
ignited and blown through holes and cracks in the surface
beingstripped.
• DO NOT burn the paint. Use the scraper and keep the nozzle
at least 25 mm away from the painted surface. When working
in a vertical direction, work downwards to prevent paint from
falling into the tool andburning.
• ALWAYS use good quality scrapers and strippingknives.
• DO NOT use the heat gun in combination with
chemicalstrippers.
• DO NOT use accessory nozzles asscrapers.
• DO NOT direct heatgun airflow directly on glass. The
glass may crack and could result in property damage or
personalinjury.
• Maintain labels and nameplates. These carry
importantinformation.
• Place the heat gun on a stable, level surface when not
handheld.
• Be constantly aware that this tool can ignite flammable
materials, soften or melt others. Regardless of the task you
are performing, shield or keep the heat gun away from
thesematerials.
• You may occasionally notice some slight smoking of the tool
after it is turned off. This is the result of heating the residual
oil that was deposited on the heating element during the
manufacturingprocess.
• Use eye protection and other safetyequipment.
• Do not expose tools to rain or wet conditions. Water
entering a tool will increase the risk of electricshock.
• Do not overreach. Keep proper footing and balance
at all times. This enables better control of the tool in
unexpectedsituations.
• Store idle tools out of the reach of children and do
not allow persons unfamiliar with the tool or these
instructions to operate the tool. Tools are dangerous in the
hands of untrainedusers.
• Have your tool serviced by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the tool ismaintained.
• Welding operations must not be repeated on a fitting since
this can result in live parts becomingaccessible.
Persons Removing Paint Should Always Follow
These Guidelines:

WARNING: Extreme care should be taken when stripping
paint. The peelings, residue and vapors of paint may
contain lead, which is poisonous. Any pre-1977 paint may
contain lead and paint applied to homes prior to 1950 is
likely to contain lead. Once deposited on surfaces, hand to
mouth contact can result in the ingestion of lead. Exposure
to even low levels of lead can cause irreversible brain and
nervous system damage; young and unborn children are
particularlyvulnerable.
Before beginning any paint removal process you should determine
whether the paint you are removing contains lead. This can be
done by your local health department or by a professional who
uses a paint analyzer to check the lead content of the paint to be
removed. LEADBASED PAINT SHOULD ONLY BE REMOVED
BY A PROFESSIONAL AND SHOULD NOT BE REMOVED
USING A HEAT GUN. Persons removing paint should follow
theseguidelines:
1 . Move the workpiece outdoors. If this is not possible,
keep the work area well ventilated. Open the windows
and put an exhaust fan in one of them. Be sure the fan is
moving the air from inside tooutside.
2 . Remove or cover any carpets, rugs, furniture, clothing, cooking
utensils and airducts.

DeWalt DCE530 Specifications

General

Brand	DeWalt
Model	DCE530
Category	Power Tool
Language	English