DeWalt DCE570 - Page 5

ENGLISH
3
HEAVYDUTY CORDLESS MATERIAL DISPENSER
DCE560, DCE571, DCE580, DCE581
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the
most reliable partners for professional power toolusers.
Technical Data
DCE560 DCE571 DCE580 DCE581
Voltage V
DC
18 18 18 18
Type 1 1 1 1
Battery type Li-Ion Li-Ion Li-Ion Li-Ion
Push force kg 254 254 254 254
Weight (without battery pack) kg 1.8 2.1 2.2 2.2
Noise values and vibration values (triax vector sum) according to EN60745:
L
PA
(emission sound pressure level) dB(A) 66 66 66 66
L
WA
(sound power level) dB(A) 77 77 77 77
K (uncertainty for the given sound level) dB(A) 5 5 5 5
Vibration emission value a
h
= m/s
2
<2.5 <2.5 <2.5 <2.5
Uncertainty K = m/s
2
1.5 1.5 1.5 1.5
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of workpatterns.
EC-Declaration of Conformity
Machinery Directive
Heavy-duty Cordless Material Dispenser
DCE560, DCE571, DCE580, DCE581
DEWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DEWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDEWALT.
Markus Rompel
Director Engineering
DEWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
24.06.2016
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.