DeWalt DCF897 - Cordless Impact Wrench; Definitions: Safety Guidelines

22
ENGLISH
EC-Declaration of Conformity
Machinery Directive
18V Cordless Impact Wrench
DCF897, DCF898
DeWALT
declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-2:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
DeWALT
at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DeWALT
.
Markus Rompel
Director Engineering
DeWALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
16.08.2017
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.

Denotes risk of electricshock.

Denotes risk offire.
General Power Tool Safety Warnings

WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
English (original instructions)
18V CORDLESS IMPACT WRENCH
DCF897, DCF898
Congratulations!
You have chosen a
DeWALT
tool. Years of experience, thorough
product development and innovation make
DeWALT
one of the
most reliable partners for professional power toolusers.
Technical Data
DCF897 DCF898
Voltage V
DC
18 18
Type 1/3 1/3
Battery type Li-Ion Li-Ion
Power output W 610 610
No load speed
1st speed min
-1
0–400 0–400
2nd speed 0–1200 0–1200
3rd speed 0–1900 0–1900
Impact rate min
-1
0–2400 0–2400
Max. torque Nm 950 680
Tool holder 19 mm
(3/4")
11 mm
(7/16")
Weight (without battery pack) kg 2.6 2.8
Noise values and vibration values (triax vector sum) according to EN60745-2-2:
L
PA
(emission sound pressure
level)
dB(A) 101 101
L
WA
(sound power level) dB(A) 112 112
K (uncertainty for the given
sound level)
dB(A) 3 3
Vibration emission value a
h
= m/s
2
13 16.5
Uncertainty K = m/s
2
5.9 1.8
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of workpatterns.